Rottefella Move System

Skis, Boots and Pole Reviews and Discussion

Moderator: Moderator Group

User avatar
Neuro
World Cup
Posts: 650
Joined: Sun Nov 06, 2016 1:56 pm
Location: Oslo, Norway

Re: Rottefella Move System

Postby Neuro » Fri Oct 12, 2018 4:55 am

The Move binding is now in shelves here in Oslo for around $180.

Sadly it looks like Rottefella has pulled the electric binding idea..

User avatar
Neuro
World Cup
Posts: 650
Joined: Sun Nov 06, 2016 1:56 pm
Location: Oslo, Norway

Re: Rottefella Move System

Postby Neuro » Mon Oct 15, 2018 2:20 am

Rottefella replied to my inquiry that the electric binding has not been dropped, but just not sure when will be out.

User avatar
Magnus Johansson
World Cup
Posts: 710
Joined: Thu Apr 30, 2015 2:21 am
Location: Sweden
Contact:

Re: Rottefella Move System

Postby Magnus Johansson » Tue Oct 16, 2018 12:03 pm

The Move System's binding plate, NIS 2.0, together with the binding Rottefella Performance Classic cost 156 $ at www.xxl.se.

User avatar
Neuro
World Cup
Posts: 650
Joined: Sun Nov 06, 2016 1:56 pm
Location: Oslo, Norway

Re: Rottefella Move System

Postby Neuro » Wed Oct 17, 2018 1:38 pm

Yes, just the bindingplate with the mover alone is around $100. (This lets you use most newer bindings with it)

Image

User avatar
Magnus Johansson
World Cup
Posts: 710
Joined: Thu Apr 30, 2015 2:21 am
Location: Sweden
Contact:

Re: Rottefella Move System

Postby Magnus Johansson » Thu Oct 18, 2018 12:58 am

Neuro wrote:(This lets you use most newer bindings with it)

Rottefella said earlier that only NIS 2.0 bindings would work with the Move System. Is it really so that any NIS binding works?

User avatar
Neuro
World Cup
Posts: 650
Joined: Sun Nov 06, 2016 1:56 pm
Location: Oslo, Norway

Re: Rottefella Move System

Postby Neuro » Thu Oct 18, 2018 4:36 am

With newer I meant NIS 2 yes.

User avatar
Magnus Johansson
World Cup
Posts: 710
Joined: Thu Apr 30, 2015 2:21 am
Location: Sweden
Contact:

Re: Rottefella Move System

Postby Magnus Johansson » Thu Oct 18, 2018 11:40 am

Neuro wrote:With newer I meant NIS 2 yes.

I asked Skistart.com today, and they said any NIS binding is compatible with the Move system. That would include also the NIS compatible Rossignol Turnamic IRB. With the latter, one would have two knobs per ski to turn. Better turn the right one when shifting binding position while skiing ...

User avatar
Neuro
World Cup
Posts: 650
Joined: Sun Nov 06, 2016 1:56 pm
Location: Oslo, Norway

Re: Rottefella Move System

Postby Neuro » Fri Oct 19, 2018 3:40 am

Yes, with the 'Switch Kit', one can use different plates like for NIS 1, Salomon, Atomic, Fischer etc.

Funny like you say with two knobs to turn, but I think I saw somewhere that Turnamic is anyway going to copy the move system where their knob does more than just open and close the binding like now.

User avatar
Magnus Johansson
World Cup
Posts: 710
Joined: Thu Apr 30, 2015 2:21 am
Location: Sweden
Contact:

Re: Rottefella Move System

Postby Magnus Johansson » Fri Oct 19, 2018 5:02 am

Neuro wrote:Yes, with the 'Switch Kit', one can use different plates like for NIS 1, Salomon, Atomic, Fischer etc.

Really? SNS, Prolink and IFP bindings don't even fit NIS 1. How will it be done?

Neuro wrote:Funny like you say with two knobs to turn, but I think I saw somewhere that Turnamic is anyway going to copy the move system where their knob does more than just open and close the binding like now.

The same knob managing both fastening and shifting seems risky.

User avatar
Neuro
World Cup
Posts: 650
Joined: Sun Nov 06, 2016 1:56 pm
Location: Oslo, Norway

Re: Rottefella Move System

Postby Neuro » Fri Oct 19, 2018 6:32 am

Yes, see at the bottom of the page here: https://www.rottefella.com/move-system

The different Switch Kits: https://www.rottefella.com/bindings-acc ... untry/move

User avatar
Magnus Johansson
World Cup
Posts: 710
Joined: Thu Apr 30, 2015 2:21 am
Location: Sweden
Contact:

Re: Rottefella Move System

Postby Magnus Johansson » Fri Oct 19, 2018 7:50 am

Neuro wrote:Yes, see at the bottom of the page here: https://www.rottefella.com/move-system

The different Switch Kits: https://www.rottefella.com/bindings-acc ... untry/move

OK, thanks! However, from what I have seen now, one can't use anything else than a Rottefella NIS 2.0 binding together with the Move System, but such a binding comes included in the Move Switch Kit that can be installed on e.g. the Rottefella NIS plate for Salomon and Atomic skis (the so-called RMP).

User avatar
Magnus Johansson
World Cup
Posts: 710
Joined: Thu Apr 30, 2015 2:21 am
Location: Sweden
Contact:

Re: Rottefella Move System

Postby Magnus Johansson » Sat Oct 20, 2018 12:47 am

After having watched the Vimeo videos by Rottefella, it looked like the Move System for integrated NIS plates (NIS 1.0) was the hardest to operate; the binding seemed to glide better on both RMP and IFP.


Return to “XC Ski Gear Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest