Profile binding disassembly

Skis, Boots and Pole Reviews and Discussion

Moderator: Moderator Group

xcskiforum 10K
Posts: 1
Joined: Fri Dec 21, 2007 8:59 am

Profile binding disassembly

Postby woodyt65 » Fri Dec 21, 2007 9:04 am

Can anyone tell me how to dis-mount a profile binding?

xcskiforum 40K
Posts: 458
Joined: Fri Dec 01, 2006 11:08 am
Location: Minneapolis

Postby E365 » Fri Dec 21, 2007 4:07 pm

The toughest part is removing the sole plate. After that it's just three screws. There's the plug towards the heel that needs to be removed. A pair of very small flathead screwdrivers works fairly well. I think it's about impossible to remove the plug without hacking up the sole plate and/or plug a little bit.

After that, the sole plate needs to be pryed off the ski. It's taped on with double sided tape. (It's more like a sticky glue strip) Some heat with a hairdryer should help a bit. Carefully pry it up.

Once the sole plate is removed, you'll be able to see and remove the two back binding screws.

Using a small screwdriver, the plastic cap just forward of the bumper needs to be pryed off. Doing that will reveal the third screw.

Return to “XC Ski Gear Discussion”

Who is online

Users browsing this forum: No registered users and 4 guests